TT12-MCU/applications/core.c

/*
 * Copyright (c) 2006-2021, RT-Thread Development Team
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Change Logs:
 * Date           Author       Notes
 * 2023-06-01     murmur       the first version
 * 处理TT相关的初始化、状态切换等逻辑
 */

#include <rtthread.h>

#define LOG_TAG "core"
#define LOG_LVL LOG_LVL_DBG
#include <ulog.h>
#include <board.h>
#include <ttmsg/ttmsg.h>
//#include <cfg.h>
#include <usrcfg.h>
#include <ttTR/ttTR.h>

//static struct rt_event sw_check; //软件条件
static struct rt_event chkSta; //发送条件，含两部分，1-超时或文件准备好，2-TT满足通信条件


#define ALL_READY 1

//static int maxTTWaitTime = 4;
//static int maxTTRetryCnt = 3;



rt_sem_t TTReady= RT_NULL;//天通具备发送状态后 rt_sem_release(TTReady);
rt_sem_t cfgUpdate = RT_NULL;//配置文件更新
rt_sem_t shuntDownTT = RT_NULL;//关闭TT
rt_sem_t okTosend = RT_NULL;//可以发送后续文件。仅一个线程，文件依次发送
rt_sem_t okToreport = RT_NULL;//配置信息ACK
static rt_thread_t initThread=RT_NULL;
static rt_thread_t deinitThread=RT_NULL;
static rt_timer_t tmrToPNTT=RT_NULL;
static uint8_t isWindowMode=0;//RTC引起TT开机
static uint8_t isFileMode=0;//file is ok
uint8_t isInFileMode(void)
{
    return isFileMode;
}

SYS_CFG scfg={
        .sendInterval =60,
        .maxTTWaitTime = 4,
        .maxTTRetryCnt = 3,
        .minTTPeriCnt=5,
        .minTTsinal=5,
        .timeout=5,
        .maxSizePerFile=1024,
//        .openWindowTime[]={0x02, 0x0F, 0x03, 0x1E, 0x08, 0x0F, 0x09, 0x1E}
};

/**
 * 初始化必要的文件
 */
void initFiles()
{

    //无配置文件则新建
    if (!getFileSize("cfg.ini"))
    {
        //copy backup
        if (getFileSize("sd/cfg.ini")) {
            copy("sd/cfg.ini","cfg.ini");
            LOG_I("copied new cfg file.");
        }
        //creat new
        else
        {
            const char *cfgstr =
                    "[config]\n"
                    "# V1.9\n"
                    "#定时（默认每小时）上报时刻，\n"
                    "sendInterval=15\n"
                    "# 最大文件大小，超过此大小则进入发送流程\n"
                    "maxSizePerFile=1024 \n"
                    "# 最小等待时间（S），超时后进入待机模式（暂未使用）\n"
                    "minSecToSleep=30 \n"

                    "# TT最长等待激活时间（M），超时后重启\n"
                    "maxTTWaitTime=10\n"
                    "# TT最大重试次数\n"
                    "maxTTRetryCnt=3\n"
                    "# TT最低信号值\n"
                    "minTTsinal=3\n"
                    "# TT状态检测周期数，连续满足归为一次判决，减少波动的影响\n"
                    "minTTPeriCnt=3\n"

                    "# 压缩方式，0-不压缩\n"
                    "compressType=0\n"
                    "# 加密方式，0-不加密\n"
                    "encrytType=1\n"
                    "# 开窗时间（UTC+8）,持续时间（H）。以【,】为分隔符\n"
                    "openWindowTime=02,00,03,30,08,00,09,00\n"
                    "#超时时间（M），主动开机上报数据情况下最后一次通信后开始计时，超时后关闭TT\n"
                    "timeout=10\n"
                    "# 工作模式，1-TT，2-BD\n"
                    "commMode=1\n"
                    "# 自毁功能开关，1-开启，0-跟关闭\n"
                    "selfDesSW=0\n"
                    "# 位置告警功能开关，1-开启，0-关闭\n"
                    "locAlert=0;\n"
                    "# 定时上报位置信息间隔（M）\n"
                    "locRepInterval=5\n"
                    "isMaWin=-1\n"
                    "[stats]\n"
                    "# 继电器开关次数，影响继电器寿命（＜10W次）\n"
                    "swCnt=12\n"
                    "# 第一次上电就满足硬件条件的次数，\n"
                    "oneShotCnt=0\n"
                    "# 重启次数\n"
                    "bootCnt=13\n"
                    "# 发送总次数，由软件条件触发\n"
                    "sendCnt=0\n"
                    "# TT初始化失败次数，由MaxRetryCnt次失败后触发\n"
                    "errCnt=0\n"
                    "# 最短激活时间\n"
                    "minActiveTime=0\n"
                    "# 最长激活时间\n"
                    "maxActiveTime=0\n"
                    "# 平均激活时间，暂不考虑实现\n"
                    "meanActiveTime=0\n"

                    "# 总定时器超时次数\n"
                    "allCnt=0\n"
                    "# 发送成功次数\n"
                    "okCnt=0\n";
            LOG_W("no cfg file found, creat one.");
            int fd = open(LJW_CFG_FILE_NAME, O_WRONLY | O_CREAT);
            if (fd > 0) {
                write(fd, cfgstr, strlen(cfgstr));
                close(fd);
            }
            else {
                LOG_E("failed to creat cfg file.");
            }
        }
    }

    //map file
    if (!getFileSize("map.geojson")) {
        if (getFileSize("sd/map.geojson")) {
            copy("sd/map.geojson","map.geojson");
            LOG_I("copied new map file.");
        }
        else {

            const char *cfgstr =
                    "{\"type\":\"FeatureCollection\",\"features\":[{\"type\":\"Feature\",\"properties\":{},\"geometry\":{\"coordinates\":[[[109.85768145990244,18.422149049902515],[109.85578152088834,18.418353201926465],[109.86089674131063,18.41424527209267],[109.86531775324693,18.418387867583846],[109.86491584307038,18.421785068111333],[109.85768145990244,18.422149049902515]]],\"type\":\"Polygon\"}}]}";
            LOG_W("no map file found, creat map one.");
            int fd = open("map.geojson", O_WRONLY | O_CREAT);
            if (fd > 0) {
                write(fd, cfgstr, strlen(cfgstr));
                close(fd);
            }
            else {
                LOG_E("failed to creat map file.");
            }
        }
    }

//    checkFlash();
}

/**
 * 更新全局参数
 */
static void initCfg(void)
{
    initFiles();

    scfg.maxTTWaitTime = get_cfg("maxTTWaitTime");
    scfg.maxTTRetryCnt = get_cfg("maxTTRetryCnt");
    scfg.minTTPeriCnt = get_cfg("minTTPeriCnt");
    scfg.minTTsinal = get_cfg("minTTsinal");
    scfg.timeout = get_cfg("timeout");
    scfg.maxSizePerFile = get_cfg("maxSizePerFile");
    scfg.locRepInterval = get_cfg("locRepInterval");
    scfg.isMaWin = get_cfg("isMaWin");
    scfg.locAlert = get_cfg("locAlert");

    char str[sizeof(scfg.openWindowTime)*4];
    get_cfgs("openWindowTime", str);
    size_t len = str2Byte(str, 3, 10, scfg.openWindowTime);
//        LOG_HEX("win",16,scfg.openWindowTime,len);
    updateAlarm(scfg.openWindowTime, len);
    startAlarm();

    LOG_D("cfg updated.");
}
static void updatecfg(void)
{
    //等待更新
    while(1)
    {
//        rt_thread_mdelay(10*1000);//10s写入一次数据到文件
        if(rt_sem_take(cfgUpdate, RT_WAITING_FOREVER) == RT_EOK)
        {
            updateAllSysCfg(&scfg, 0);
        }

    }
}


void sysSemInit()
{
    okTosend = rt_sem_create("okTosend", 0, RT_IPC_FLAG_FIFO);//同一时间仅一个线程发送文件
    cfgUpdate = rt_sem_create("cfgUpdate", 0, RT_IPC_FLAG_FIFO);//更新cfg
    shuntDownTT = rt_sem_create("shuntDNTT", 0, RT_IPC_FLAG_FIFO);//关闭TT
    okToreport = rt_sem_create("reportINFO", 0, RT_IPC_FLAG_FIFO);//关闭TT
//    rt_event_init(&chkSta, "chkSta", RT_IPC_FLAG_FIFO);//检查天通状态
//    rt_sem_release(cfgUpdate);        //上电更新值

//    initCfgMutex();
//    void reportINFO();
    reportINFO();
    /* 创建 serial 线程 */
        rt_thread_t thread =   rt_thread_create("updatecfg", updatecfg, RT_NULL, 1024 * 5, 27+1, 10);
        /* 创建成功则启动线程 */
        if (thread != RT_NULL)
        {
            rt_thread_startup(thread);
        }
        else
        {
            LOG_E("thread 'updatecfg' create failure.");
            return;
        }

//    LOG_D("sysSemInit DONE.");
}









void sysEventInit(void)
{
    rt_err_t result = rt_event_init(&chkSta, "chkSta", RT_IPC_FLAG_PRIO);

    if (result != RT_EOK)
    {
        LOG_E("init event failed.\n");
    }
}

void sysInit(void)
{
    sysSemInit();
    initCfg();
    checkManualWindow();
    if (isManualWindow()) {//手动开窗优先级最高
        initTT();
    }
    else if (isInWindowZone()) {//开机检查是否在开窗区间内，是则给TT开机
        setWindowMode();
        initTT();
    }
    else if (isNeedRestore()) {//Restoring configuration after a crash
        initTT();
    }
    if (getCntOfFileToSend()) {
        LOG_I("cached file(s) to send");
        fileIsReady();
    }

}
//INIT_COMPONENT_EXPORT(sysInit);

void timerIsReady(void)
{
    rt_event_send(&chkSta, TIMER_IS_OUT);
    stopTM();//停止而不是重置，避免超时时间小于未激活重试时间的情况下意外关机。
}
void fileIsReady(void)
{
    rt_event_send(&chkSta, FILE_IS_OK);
    stopTM();
}
static int isTTok=0;
void TTIsReady(void)
{
    isTTok=1;
//    rt_event_send(&chkSta, TT_IS_OK);
//    rt_sem_release(TTReady);
//    resetTM();
}
void TTIsNotReady(void)
{
    isTTok=0;
//    rt_event_send(&chkSta, TT_IS_OK);
//    resetTM();
}





/**
 * 关闭超时定时器，定时时间到后关闭TT
 */
void stopTM(void)
{
    if (!tmrToPNTT) {
        return;
    }
    rt_timer_stop(tmrToPNTT);
    rt_timer_stop(tmrToPNTT);
}

/**
 * 更新开窗flag以关闭超时机制
 */
void setWindowMode(void)
{
    isWindowMode = 1;
    stopTM();
}
/**
 * 恢复超时机制
 */
void clearWindowMode(void)
{
    isWindowMode = 0;
    stopTM();
}
/**
 * 重启超时定时器，定时时间到后关闭TT
 * 逻辑是非开窗（包括自动、手动）状态下TT无接收数据则启动关机倒计时
 */
void d_remain(void);
void resetTM(void)
{
//    LOG_D("try to reset");
    if (tmrToPNTT == RT_NULL) {
        LOG_E("tmrToPNTT is NULL");
        return;
    }
    if (isManualWindow()) {
            stopAlarm();
            stopTM();
            LOG_W("TIMEOUT stopped.[isManualMode]");
            return;
        }
    if (isWindowMode) {
        stopTM();
        LOG_W("TIMEOUT stopped.[isWindowMode]");
        return;
    }
    if (isFileMode) {
        stopTM();
        LOG_W("TIMEOUT stopped.[isFileMode]");
        return;
    }

    rt_tick_t t= rt_tick_from_millisecond(scfg.timeout*60*1000);
    rt_timer_control(tmrToPNTT, RT_TIMER_CTRL_SET_TIME,(void*) &t);
//    rt_timer_stop(tmrToPNTT);
    int i=0;
    while(rt_timer_start(tmrToPNTT) != RT_EOK)
    {
        if (i++ > 10) {
            LOG_E("TIMEOUT fault.");
            return;
            break;
        }
        rt_thread_mdelay(200);
    }
    LOG_W("%d minutes from now to power down TT.",scfg.timeout);

//    d_remain();
//    rt_thread_mdelay(500);
//    d_remain();
//    rt_thread_mdelay(500);
//    d_remain();
//    rt_thread_mdelay(500);
//    d_remain();
}

void d_remain(void)
{
    if (tmrToPNTT == RT_NULL) {
        LOG_W("tmrToPNTT is NULL");
        return;
    }

    rt_tick_t arg1,arg2;
    rt_timer_control(tmrToPNTT, RT_TIMER_CTRL_GET_TIME, (void*)&arg1);
    rt_timer_control(tmrToPNTT, RT_TIMER_CTRL_GET_REMAIN_TIME, (void*)&arg2);

    rt_uint32_t arg3=0;
    rt_timer_control(tmrToPNTT, RT_TIMER_CTRL_GET_STATE, (void*)&arg3);
    LOG_D("%s",arg3?"YES":"NO");
    if (arg3) {
        int tmp=(arg2-rt_tick_get())/1000;
        LOG_D("t=%ld,0x%X -> 0x%X",tmp,rt_tick_get(),arg2);
        LOG_D("%dm%ds / %d min",tmp/60,tmp%60,arg1/60000);
    }
}

/* 定时器超时函数 */
static void timeoutFunc(void *parameter)
{
    stopTM();
    if (deinitThread) {
        LOG_W("timeout leads to shunt down TT");
//    rt_thread_mdelay(3000);// no delay
        deInitTT();//Function[rt_mutex_take] shall not be used in ISR
    }

}


//extern void ttinfoInit(void);
//extern void startTTinfo(void);
/**
 * 监控TT状态。需求条件1：TT连续5个周期为激活状态且信号强度不低于5。
 */
void checkTT()
{
    repGetTT(); //持续更新
}

typedef struct
{
    char fname[60];
    uint8_t index;
}FILE_INFO;

static void upSendFile_thread_entry(void *parameter)
{
    FILE_INFO *f = RT_NULL;
    f = (FILE_INFO *) parameter;
//    rt_mutex_take(okTosend, RT_WAITING_FOREVER);
    static rt_uint8_t d[BUFFER_ROW][200] = { };//need static?
    static rt_uint8_t s[BUFFER_ROW] = { };
    memset(s,0,BUFFER_ROW);
    if (!getFileSize(f->fname)) {
        LOG_W("file '%s' is empty.",f->fname);
        clearFileToSend(f->fname);
        rt_sem_release(okTosend);
        return;
    }
    if (getFileSize(f->fname) > scfg.maxSizePerFile+200) {//部分demo数据体积>>1k
        LOG_W("file '%s' is too large to send.",f->fname);
        clearFileToSend(f->fname);
        rt_sem_release(okTosend);
        return;
    }

    LOG_D("ready to send '%s---%d'",f->fname,f->index);
    uint8_t len = pack_File(f->fname, 0, d, s);
    for (size_t i = 0; i < len; i++) {
//        LOG_HEX("msg",27,d[i],s[i]);
    }
//    list_thread();
    if (len)
    {
        LOG_D("%d pack(s) to send", f->index ? 1 : len);
        uint8_t issendall=1;
        for (size_t var = 0; (var < len && s[var]!=0); var++)
        {
            if (!f->index || (var+1) == f->index)
            { //index=0 全发，或者仅发index
                if (isTTjh() && sendMsg(d[var], s[var]) == RT_EOK) {
                    LOG_D("send pack[%d] with %d bytes done.",var+1,s[var]);
                }
                else {
                    LOG_E("TT未到位或发送失败");
                    issendall=0;
//                    break;
                }
                rt_thread_mdelay(3000);//发送间隔，目前服务器未处理，暂设为3s避免粘包
            }
        }
        if (issendall) {
            LOG_I("upSendFile '%s' done.",f->fname);
            clearFileToSend(f->fname);//由于没有准确的校核机制，此处自能认为是发送成功
        }


//        list_thread();

    }
    //当前文件处理完后置位
    rt_sem_release(okTosend);
}

/**
 * 发送文件
 * @param f 待发文件，指完整路径名
 * @param index 指定发送的切片索引，为0时表示全部发送
 */
void upSendFile(const char *f, int index)
{
    static FILE_INFO info;
    rt_memset(&info, 0, sizeof(FILE_INFO));
    strcpy(info.fname, f);
    info.index = index;

    /* 创建 serial 线程 */
    rt_thread_t thread = rt_thread_create("SendFile", upSendFile_thread_entry, (void *) &info, 1024 * 10, 27, 10);
    /* 创建成功则启动线程 */
    if (thread != RT_NULL)
    {
        rt_thread_startup(thread);
    }
    else
    {
        LOG_E("thread 'upSendFile' create failure.");
        return;
    }
}
void d_upSendFile(int argc, char **argv)
{
    int index=0;
    if (argc == 3) {
        index = atoi(argv[2]);
    }
    upSendFile(argv[1], index);
}

/**
 * 获取本地待发文件列表并倒序发送
 */
void getAndSendFile()
{
//    resetTM();
    isFileMode=0;//逻辑不是很准确
    //优先发送未达指定大小的文件
    char fnow[50];
    getLstCacheFileName(fnow);
    manualAaddlst(fnow);
    updateCacheFileName();
    rt_thread_mdelay(1000);



    uint8_t cnt = (uint8_t)getCntOfFileToSend();
    if(cnt)
    {
        LOG_I("ready to send %d file(s).",cnt);
    }
    else {
        LOG_W("no files waiting to be sent.");
        resetTM();//启动超时
        return;
    }

    rt_sem_release(okTosend);//初始赋值
    static int index[MAX_KEY_LEN];
    char f[cnt][MAX_KEY_LEN];
    getFilesToSend(f, index);
    for (int var = 0; var < 2; ++var) {
    for (int i = cnt-1; i > -1; i--)//倒序发送
    {
        LOG_D("f[%d]=%s",i,f[i]);
//        continue;
        if (rt_sem_take(okTosend, RT_WAITING_FOREVER) == RT_EOK)
        {
            rt_thread_mdelay(1000);//thread close
            upSendFile(f[i],index[i]);
        }
    }
    }
    //发送完毕
    LOG_D("mission done.");
    resetTM();
}

static void chkAndSendFile_thread_entry()
{
    while (1)
    {
//        int e;
        LOG_I("ready and waiting",scfg.sendInterval);
        if (rt_event_recv(&chkSta, FILE_IS_OK | TIMER_IS_OUT, RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
        RT_WAITING_FOREVER, RT_NULL) == RT_EOK) //条件1满足
        {
            isFileMode=1;
            LOG_I("等待TT就绪");
            LOG_I("当前规则为：连续%d个采集周期TT信号质量不低于%d",scfg.minTTPeriCnt,scfg.minTTsinal);
            initTT();
        }

        TTIsNotReady();//复位

        size_t maxCnt = 0xffff;
        if (!isWindowMode && !isManualWindow())
        {
            maxCnt = scfg.maxTTRetryCnt;
        }

        for (size_t var = 0; var < maxCnt; var++) //轮询尝试
        {
            rt_tick_t tm = rt_tick_get_millisecond();
            LOG_I("第%d/%d次尝试。", var + 1, maxCnt);
            int flag=0;
            while (1)
            {
                if (isTTok)
                {
                    isTTok=0;
                    rt_thread_mdelay(3000);
                    getAndSendFile();
                    flag=1;
                    break;
                }
                else
                {
                    //not ready
                    if ((rt_tick_get_millisecond() - tm) > rt_tick_from_millisecond(scfg.maxTTWaitTime * 60 * 1000)) //超时
                    {
                        break;
                    }
                    else
                    {
                        rt_thread_mdelay(1000);
                    }
                }
            } //end while

            if (flag) {
                break;
            }
            if ((var + 1) < maxCnt)
            {
                LOG_W("第%d次尝试中TT准备失败，重试。", var + 1);
                deInitTT();
                rt_thread_mdelay(5000);
                initTT();
            }
            else
            {
                LOG_E("TT准备失败");
                deInitTT();
                isFileMode=0;
                break;
            }
        }
//        LOG_W("--------one loop DONE--------");
    }
}


/**
 * 检查状态并发送文件
 */
void chkAndSendFile()
{
    sysEventInit();//必须此处初始化，不然EVENT无法加入链表
    if (!tmrToPNTT) {
                tmrToPNTT = rt_timer_create("TTtimeout", timeoutFunc,
                             RT_NULL, rt_tick_from_millisecond(scfg.timeout*60*1000),
                             RT_TIMER_FLAG_PERIODIC);//|RT_TIMER_FLAG_SOFT_TIMER);
            }
    /* 创建 serial 线程 */
    rt_thread_t thread = rt_thread_create("chk&send", chkAndSendFile_thread_entry, RT_NULL, 1024 * 5, 19, 10);
    /* 创建成功则启动线程 */
    if (thread != RT_NULL)
    {
        rt_thread_startup(thread);
    }
    else
    {
        LOG_E("thread 'chk&send' create failure.");
        return;
    }
}
INIT_APP_EXPORT(chkAndSendFile);

//RT_TICK_PER_SECOND
//tcp连接保活
//实际场景不存在中间断掉的可能
void initTT_thread_entry()
{
    pwTT_thread_entry("1");
//    rt_thread_mdelay(15000);//wait TT to boot up
    static uint8_t cnt=0;
    while (1)
    {
        if (!isTTon()) {
            break;
        }

        if (!tmrToPNTT) {
            tmrToPNTT = rt_timer_create("TTtimeout", timeoutFunc,
                         RT_NULL, rt_tick_from_millisecond(scfg.timeout*60*1000),
                         RT_TIMER_FLAG_ONE_SHOT);//|RT_TIMER_FLAG_SOFT_TIMER);
        }

        if (!isEthUP())//只初始化一次
        {
            LOG_D("init eth...");
            rt_pin_write(ETH_RESET_PIN, PIN_HIGH);
            if (rt_hw_stm32_eth_init() == RT_EOK)//激活网口
            {
                LOG_I("eth inited DONE.");
            };
        }
        else if (!isTCPok())        //判断TCP连接是否正常，异常自动重连
        {
            if (tcpInit() != RT_EOK)
            {
                if (cnt >= 10)
                {
                    cnt=0;
                    LOG_E("TT is not responded, check the power or TT device.");
                    deInitTT();
                    break;
                }
                if (isEthUP())
                {
                    cnt++;
                    LOG_D("[%d] retry.",cnt);
                    rt_hw_stm32_eth_deinit();
                    continue;
                }
            }
            else
            {
                LOG_I("TCP is ready.");
                tcpRecMQ();        //开启tcp接收线程
                recTT();
                repGetTT();
                reportLoc();
                if (getCntOfFileToSend()) fileIsReady();
//                resetTM();//启动超时，激活后开启
            }
        }

        rt_thread_mdelay(3000);        //chk with 3 second interval
    }

    initThread=RT_NULL;
    pwTT_thread_entry("0");
//    list_thread();
//    cmd_free();
}


void deInitTT_thread_entry()
{
    if (deinitThread != RT_NULL && rt_sem_take(shuntDownTT, RT_WAITING_FOREVER) == RT_EOK)
    {
        deinitThread =RT_NULL;
        tcpClose();
        if (isEthUP()) {
            rt_hw_stm32_eth_deinit();        //qu激活网口
        }

        pwTT_thread_entry("0");
//        startAlarm();
        clearWindowMode();
//        setManualWindow(-1);
        setWorkSta(0);
//        isFileMode=0;
        LOG_W("shunt down TT DONE");
    }
//    initThread = RT_NULL;
    deinitThread = RT_NULL;
    pwTT_thread_entry("0");
//    list_thread();
}

/**
 * TT上电，初始化TT相关的网络、TCP等，并保活
 */
void initTT()
{
    /* 创建 serial 线程 */
    if (initThread != RT_NULL) {
        LOG_W("TT is already running.");
        return;
    }
    set3SRTC();
    setWorkSta(1);
//    isFileMode=1;
    initThread = rt_thread_create("initTT", initTT_thread_entry, RT_NULL, 1024 * 5, 25, 10);
    /* 创建成功则启动线程 */
    if (initThread != RT_NULL)
    {
        rt_thread_startup(initThread);
    }
    else
    {
        LOG_E("thread 'initTT' create failure.");
        return;
    }

    /* 创建 serial 线程 */
    if (deinitThread != RT_NULL) {
            return;
        }
    deinitThread = rt_thread_create("deInitTT", deInitTT_thread_entry, RT_NULL, 1024 * 5, 25, 10);
    /* 创建成功则启动线程 */
    if (deinitThread != RT_NULL)
    {
        rt_thread_startup(deinitThread);
    }
    else
    {
        LOG_E("thread 'deInitTT' create failure.");
        return;
    }
}

/**
 * TT上电，初始化TT相关的网络、TCP等，并保活
 */
void deInitTT()
{
    rt_sem_release(shuntDownTT);
}

#define FUNC_DEMO
#ifdef FUNC_DEMO //测试时导出命令到控制台
MSH_CMD_EXPORT_ALIAS(TTIsReady,ttisok,TT_IS_OK);
MSH_CMD_EXPORT(fileIsReady,fileIsReady);
//MSH_CMD_EXPORT(chkAndSendFile, chkAndSendFile);
//MSH_CMD_EXPORT(getAndSendFile, getAndSendFile);
MSH_CMD_EXPORT(initTT,初始化TT);
MSH_CMD_EXPORT(deInitTT,去初始化TT);
MSH_CMD_EXPORT(d_remain,剩余超时时间);
MSH_CMD_EXPORT(resetTM,resetTM);
MSH_CMD_EXPORT(d_upSendFile,d_upSendFile);
#endif