/* * Copyright (c) 2006-2023, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2023-04-27 RealThread first version */ #include #include #include RT_WEAK void rt_hw_board_init() { extern void hw_board_init(char *clock_src, int32_t clock_src_freq, int32_t clock_target_freq); /* Heap initialization */ #if defined(RT_USING_HEAP) rt_system_heap_init((void *) HEAP_BEGIN, (void *) HEAP_END); #endif hw_board_init(BSP_CLOCK_SOURCE, BSP_CLOCK_SOURCE_FREQ_MHZ, BSP_CLOCK_SYSTEM_FREQ_MHZ); /* Set the shell console output device */ #if defined(RT_USING_DEVICE) && defined(RT_USING_CONSOLE) rt_console_set_device(RT_CONSOLE_DEVICE_NAME); #endif /* Board underlying hardware initialization */ #ifdef RT_USING_COMPONENTS_INIT rt_components_board_init(); #endif } /** * @brief SPI MSP Initialization * This function configures the hardware resources used in this example * @param hspi: SPI handle pointer * @retval None */ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi) { GPIO_InitTypeDef GPIO_InitStruct = {0}; if(hspi->Instance==SPI2) { /* USER CODE BEGIN SPI1_MspInit 0 */ /* USER CODE END SPI1_MspInit 0 */ /* Peripheral clock enable */ __HAL_RCC_SPI2_CLK_ENABLE(); __HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOB_CLK_ENABLE(); /**SPI1 GPIO Configuration PB3 ------> SPI1_SCK PB4 ------> SPI1_MISO PB5 ------> SPI1_MOSI */ /**SPI2 GPIO Configuration PB13 ------> SPI1_SCK PB14 ------> SPI1_MISO PB15 ------> SPI1_MOSI */ GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; GPIO_InitStruct.Alternate = GPIO_AF5_SPI2; HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); /* USER CODE BEGIN SPI1_MspInit 1 */ /* USER CODE END SPI1_MspInit 1 */ } } /** * @brief ADC MSP Initialization * This function configures the hardware resources used in this example * @param hadc: ADC handle pointer * @retval None */ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) { if(hadc->Instance==ADC1) { /* USER CODE BEGIN ADC1_MspInit 0 */ /* USER CODE END ADC1_MspInit 0 */ /* Peripheral clock enable */ __HAL_RCC_ADC1_CLK_ENABLE(); /* USER CODE BEGIN ADC1_MspInit 1 */ /* USER CODE END ADC1_MspInit 1 */ } } //185.47kB/103180B no ETH /** * @brief ETH MSP Initialization * This function configures the hardware resources used in this example * @param heth: ETH handle pointer * @retval None */ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth) { GPIO_InitTypeDef GPIO_InitStruct = {0}; if(heth->Instance==ETH) { /* USER CODE BEGIN ETH_MspInit 0 */ /* USER CODE END ETH_MspInit 0 */ /* Peripheral clock enable */ __HAL_RCC_ETH_CLK_ENABLE(); __HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOB_CLK_ENABLE(); /**ETH GPIO Configuration PC1 ------> ETH_MDC PA1 ------> ETH_REF_CLK PA2 ------> ETH_MDIO PA7 ------> ETH_CRS_DV PC4 ------> ETH_RXD0 PC5 ------> ETH_RXD1 PG11 PB11 ------> ETH_TX_EN PG13 PB12 ------> ETH_TXD0 PG14 PB13 ------> ETH_TXD1 */ GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.Alternate = GPIO_AF11_ETH; HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.Alternate = GPIO_AF11_ETH; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_13; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.Alternate = GPIO_AF11_ETH; HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); /* ETH interrupt Init */ HAL_NVIC_SetPriority(ETH_IRQn, 0, 0); HAL_NVIC_EnableIRQ(ETH_IRQn); /* USER CODE BEGIN ETH_MspInit 1 */ /* USER CODE END ETH_MspInit 1 */ } } void phy_reset(void) { rt_pin_mode(ETH_RESET_PIN, PIN_MODE_OUTPUT); rt_pin_write(ETH_RESET_PIN, PIN_HIGH); rt_thread_mdelay(200); rt_pin_write(ETH_RESET_PIN, PIN_LOW); rt_thread_mdelay(200); rt_pin_write(ETH_RESET_PIN, PIN_HIGH); } //242.16 KB /51556-64564-70868 add ETH /** * @brief SD MSP Initialization * This function configures the hardware resources used in this example * @param hsd: SD handle pointer * @retval None */ void HAL_SD_MspInit(SD_HandleTypeDef* hsd) { GPIO_InitTypeDef GPIO_InitStruct = {0}; if(hsd->Instance==SDIO) { /* USER CODE BEGIN SDIO_MspInit 0 */ /* USER CODE END SDIO_MspInit 0 */ /* Peripheral clock enable */ __HAL_RCC_SDIO_CLK_ENABLE(); __HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOD_CLK_ENABLE(); /**SDIO GPIO Configuration PC8 ------> SDIO_D0 PC9 ------> SDIO_D1 PC10 ------> SDIO_D2 PC11 ------> SDIO_D3 PC12 ------> SDIO_CK PD2 ------> SDIO_CMD */ GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 |GPIO_PIN_12; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.Alternate = GPIO_AF12_SDIO; HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); GPIO_InitStruct.Pin = GPIO_PIN_2; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.Alternate = GPIO_AF12_SDIO; HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); /* USER CODE BEGIN SDIO_MspInit 1 */ /* USER CODE END SDIO_MspInit 1 */ } } static uint32_t FSMC_Initialized = 0; void HAL_FSMC_MspInit(void){ /* USER CODE BEGIN FSMC_MspInit 0 */ /* USER CODE END FSMC_MspInit 0 */ GPIO_InitTypeDef GPIO_InitStruct ={0}; if (FSMC_Initialized) { return; } FSMC_Initialized = 1; /* Peripheral clock enable */ __HAL_RCC_FSMC_CLK_ENABLE(); /** FSMC GPIO Configuration PF0 ------> FSMC_A0 PF1 ------> FSMC_A1 PF2 ------> FSMC_A2 PF3 ------> FSMC_A3 PF4 ------> FSMC_A4 PF5 ------> FSMC_A5 PF12 ------> FSMC_A6 PF13 ------> FSMC_A7 PF14 ------> FSMC_A8 PF15 ------> FSMC_A9 PG0 ------> FSMC_A10 PG1 ------> FSMC_A11 PE7 ------> FSMC_D4 PE8 ------> FSMC_D5 PE9 ------> FSMC_D6 PE10 ------> FSMC_D7 PE11 ------> FSMC_D8 PE12 ------> FSMC_D9 PE13 ------> FSMC_D10 PE14 ------> FSMC_D11 PE15 ------> FSMC_D12 PD8 ------> FSMC_D13 PD9 ------> FSMC_D14 PD10 ------> FSMC_D15 PD11 ------> FSMC_A16 PD12 ------> FSMC_A17 PD13 ------> FSMC_A18 PD14 ------> FSMC_D0 PD15 ------> FSMC_D1 PG2 ------> FSMC_A12 PG3 ------> FSMC_A13 PG4 ------> FSMC_A14 PG5 ------> FSMC_A15 PD0 ------> FSMC_D2 PD1 ------> FSMC_D3 PD4 ------> FSMC_NOE PD5 ------> FSMC_NWE PG10 ------> FSMC_NE3 PE0 ------> FSMC_NBL0 PE1 ------> FSMC_NBL1 */ GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13 |GPIO_PIN_14|GPIO_PIN_15; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_PULLUP; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.Alternate = GPIO_AF12_FSMC; HAL_GPIO_Init(GPIOF, &GPIO_InitStruct); GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_10; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_PULLUP; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.Alternate = GPIO_AF12_FSMC; HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_PULLUP; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.Alternate = GPIO_AF12_FSMC; HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15 |GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_PULLUP; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.Alternate = GPIO_AF12_FSMC; HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); /* USER CODE BEGIN FSMC_MspInit 1 */ /* USER CODE END FSMC_MspInit 1 */ } void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram){ /* USER CODE BEGIN SRAM_MspInit 0 */ /* USER CODE END SRAM_MspInit 0 */ HAL_FSMC_MspInit(); /* USER CODE BEGIN SRAM_MspInit 1 */ /* USER CODE END SRAM_MspInit 1 */ } SRAM_HandleTypeDef hsram1; /* FSMC initialization function */ void MX_FSMC_Init(void) { /* USER CODE BEGIN FSMC_Init 0 */ /* USER CODE END FSMC_Init 0 */ FSMC_NORSRAM_TimingTypeDef Timing = {0}; /* USER CODE BEGIN FSMC_Init 1 */ /* USER CODE END FSMC_Init 1 */ /** Perform the SRAM1 memory initialization sequence */ hsram1.Instance = FSMC_NORSRAM_DEVICE; hsram1.Extended = FSMC_NORSRAM_EXTENDED_DEVICE; /* hsram1.Init */ hsram1.Init.NSBank = FSMC_NORSRAM_BANK3; hsram1.Init.DataAddressMux = FSMC_DATA_ADDRESS_MUX_DISABLE; hsram1.Init.MemoryType = FSMC_MEMORY_TYPE_SRAM; hsram1.Init.MemoryDataWidth = FSMC_NORSRAM_MEM_BUS_WIDTH_16; hsram1.Init.BurstAccessMode = FSMC_BURST_ACCESS_MODE_DISABLE; hsram1.Init.WaitSignalPolarity = FSMC_WAIT_SIGNAL_POLARITY_LOW; hsram1.Init.WrapMode = FSMC_WRAP_MODE_DISABLE; hsram1.Init.WaitSignalActive = FSMC_WAIT_TIMING_BEFORE_WS; hsram1.Init.WriteOperation = FSMC_WRITE_OPERATION_ENABLE; hsram1.Init.WaitSignal = FSMC_WAIT_SIGNAL_DISABLE; hsram1.Init.ExtendedMode = FSMC_EXTENDED_MODE_DISABLE; hsram1.Init.AsynchronousWait = FSMC_ASYNCHRONOUS_WAIT_DISABLE; hsram1.Init.WriteBurst = FSMC_WRITE_BURST_DISABLE; hsram1.Init.PageSize = FSMC_PAGE_SIZE_NONE; /* Timing */ Timing.AddressSetupTime = 0; Timing.AddressHoldTime = 0; Timing.DataSetupTime = 8; Timing.BusTurnAroundDuration = 0; Timing.CLKDivision = 0; Timing.DataLatency = 0; Timing.AccessMode = FSMC_ACCESS_MODE_A; /* ExtTiming */ if (HAL_SRAM_Init(&hsram1, &Timing, NULL) != HAL_OK) { Error_Handler( ); } /* USER CODE BEGIN FSMC_Init 2 */ else { // LOG_I("sram init success, mapped at 0x%X, size is %d bytes, data width is %d", SRAM_BANK_ADDR, SRAM_SIZE, SRAM_DATA_WIDTH); #ifdef RT_USING_MEMHEAP_AS_HEAP /* If RT_USING_MEMHEAP_AS_HEAP is enabled, SRAM is initialized to the heap */ static struct rt_memheap sram_heap; rt_memheap_init(&sram_heap, "sram", (void *)SRAM_BANK_ADDR, SRAM_SIZE); #endif } /* USER CODE END FSMC_Init 2 */ }