murmur/TT12-MCU
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

add eth --//242.16 KB /51556-64564-70868 add ETH

Browse Source 
无ifconfig 无ping
This commit is contained in:
murmur 2023-04-28 11:39:00 +08:00
parent 5284e1c741
commit a7102ab2dc
5 changed files with 128 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
applications/main.c
View File

@ -15,11 +15,13 @@
#include <ulog.h>
#include <board.h>
#define LED_HEART GET_PIN(E,3)
#define ETH_RESET_PIN GET_PIN(E, 7)//71
//#define RESET_LB GET_PIN(E, 1)
//#define RESET_UB GET_PIN(E, 0)
//#define RESET_CE GET_PIN(G, 10)
//#define LED_HEART GET_PIN(E,3)
//#ifndef ETH_RESET_PIN
//#define ETH_RESET_PIN GET_PIN(E, 7)//71
//#endif
////#define RESET_LB GET_PIN(E, 1)
////#define RESET_UB GET_PIN(E, 0)
////#define RESET_CE GET_PIN(G, 10)
int main(void)
{

75
drivers/board.c
View File

@ -98,4 +98,79 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
}
}
//185.47kB/103180B no ETH
/**
* @brief ETH MSP Initialization
* This function configures the hardware resources used in this example
* @param heth: ETH handle pointer
* @retval None
*/
void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(heth->Instance==ETH)
{
/* USER CODE BEGIN ETH_MspInit 0 */
/* USER CODE END ETH_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_ETH_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**ETH GPIO Configuration
PC1 ------> ETH_MDC
PA1 ------> ETH_REF_CLK
PA2 ------> ETH_MDIO
PA7 ------> ETH_CRS_DV
PC4 ------> ETH_RXD0
PC5 ------> ETH_RXD1
PG11 PB11 ------> ETH_TX_EN
PG13 PB12 ------> ETH_TXD0
PG14 PB13 ------> ETH_TXD1
*/
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/* ETH interrupt Init */
HAL_NVIC_SetPriority(ETH_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(ETH_IRQn);
/* USER CODE BEGIN ETH_MspInit 1 */
/* USER CODE END ETH_MspInit 1 */
}
}
void phy_reset(void)
{
rt_pin_mode(ETH_RESET_PIN, PIN_MODE_OUTPUT);
rt_pin_write(ETH_RESET_PIN, PIN_HIGH);
rt_thread_mdelay(50);
rt_pin_write(ETH_RESET_PIN, PIN_LOW);
rt_thread_mdelay(50);
rt_pin_write(ETH_RESET_PIN, PIN_HIGH);
}
//242.16 KB /51556-64564-70868 add ETH

12
drivers/board.h
View File

@ -301,11 +301,11 @@ extern "C"
*
*/
/*#define BSP_USING_ETH*/
#define BSP_USING_ETH
#ifdef BSP_USING_ETH
/*#define PHY_USING_LAN8720A*/
/*#define PHY_USING_DM9161CEP*/
/*#define PHY_USING_DP83848C*/
#define PHY_USING_DP83848C
#endif
/*-------------------------- ETH CONFIG END --------------------------*/
@ -369,6 +369,14 @@ extern "C"
/*#define BSP_USING_ON_CHIP_FLASH*/
#define LED_HEART GET_PIN(E,3)
#ifndef ETH_RESET_PIN
#define ETH_RESET_PIN GET_PIN(E, 7)//71
#endif
////#define RESET_LB GET_PIN(E, 1)
////#define RESET_UB GET_PIN(E, 0)
////#define RESET_CE GET_PIN(G, 10)
/*-------------------------- ON_CHIP_FLASH CONFIG END --------------------------*/
#ifdef __cplusplus

2
drivers/stm32f4xx_hal_conf.h
View File

@ -57,7 +57,7 @@
/* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_DCMI_MODULE_ENABLED */
/* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
#define HAL_ETH_MODULE_ENABLED
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_PCCARD_MODULE_ENABLED */

35
rtconfig.h
View File

@ -107,6 +107,7 @@
#define RT_USING_SERIAL_V1
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 4096
#define RT_USING_PHY
#define RT_USING_PIN
#define RT_USING_ADC
#define RT_USING_RTC
@ -140,6 +141,40 @@
/* Network */
#define RT_USING_LWIP
#define RT_USING_LWIP212
#define RT_USING_LWIP_VER_NUM 0x20102
#define RT_LWIP_MEM_ALIGNMENT 4
/* Static IPv4 Address */
#define RT_LWIP_IPADDR "192.168.0.30"
#define RT_LWIP_GWADDR "192.168.0.1"
#define RT_LWIP_MSKADDR "255.255.255.0"
/* end of Static IPv4 Address */
#define RT_LWIP_TCP
#define RT_MEMP_NUM_NETCONN 4
#define RT_LWIP_PBUF_NUM 4
#define RT_LWIP_RAW_PCB_NUM 4
#define RT_LWIP_UDP_PCB_NUM 4
#define RT_LWIP_TCP_PCB_NUM 4
#define RT_LWIP_TCP_SEG_NUM 40
#define RT_LWIP_TCP_SND_BUF 4096
#define RT_LWIP_TCP_WND 4096
#define RT_LWIP_TCPTHREAD_PRIORITY 10
#define RT_LWIP_TCPTHREAD_MBOX_SIZE 8
#define RT_LWIP_TCPTHREAD_STACKSIZE 1024
#define RT_LWIP_ETHTHREAD_PRIORITY 12
#define RT_LWIP_ETHTHREAD_STACKSIZE 1024
#define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
#define LWIP_NETIF_STATUS_CALLBACK 1
#define LWIP_NETIF_LINK_CALLBACK 1
#define SO_REUSE 1
#define LWIP_SO_RCVTIMEO 1
#define LWIP_SO_SNDTIMEO 1
#define LWIP_SO_RCVBUF 1
#define LWIP_SO_LINGER 0
#define LWIP_NETIF_LOOPBACK 0
/* end of Network */
/* Utilities */