add uart4，update function
This commit is contained in:
murmur
parent
df9e7376e6
commit
70f414e18b
@ -9,7 +9,7 @@
|
||||
typedef struct {
|
||||
uint32_t magic; // 魔数，用于验证配置有效性
|
||||
wiz_NetInfo net_config; // 网络配置
|
||||
DeviceParam device_param; // 设备参数
|
||||
DeviceParam_t device_param; // 设备参数
|
||||
uint32_t checksum; // 校验和
|
||||
} FlashConfig_t;
|
||||
|
||||
|
||||
@ -55,12 +55,14 @@ extern volatile uint8_t motorRxEnd;
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
void transDataToMotorValve(uint8_t *data, uint16_t len);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
#define DIR4_Pin GPIO_PIN_0
|
||||
#define DIR4_GPIO_Port GPIOA
|
||||
#define DIR2_Pin GPIO_PIN_1
|
||||
#define DIR2_GPIO_Port GPIOA
|
||||
#define DIR1_Pin GPIO_PIN_2
|
||||
|
||||
@ -62,6 +62,9 @@ void DMA1_Channel5_IRQHandler(void);
|
||||
void USART1_IRQHandler(void);
|
||||
void USART2_IRQHandler(void);
|
||||
void USART3_IRQHandler(void);
|
||||
void UART4_IRQHandler(void);
|
||||
void DMA2_Channel3_IRQHandler(void);
|
||||
void DMA2_Channel4_5_IRQHandler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
@ -32,6 +32,8 @@ extern "C" {
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern UART_HandleTypeDef huart4;
|
||||
|
||||
extern UART_HandleTypeDef huart1;
|
||||
|
||||
extern UART_HandleTypeDef huart2;
|
||||
@ -42,6 +44,7 @@ extern UART_HandleTypeDef huart3;
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_UART4_Init(void);
|
||||
void MX_USART1_UART_Init(void);
|
||||
void MX_USART2_UART_Init(void);
|
||||
void MX_USART3_UART_Init(void);
|
||||
|
||||
@ -41,6 +41,7 @@ void MX_DMA_Init(void)
|
||||
|
||||
/* DMA controller clock enable */
|
||||
__HAL_RCC_DMA1_CLK_ENABLE();
|
||||
__HAL_RCC_DMA2_CLK_ENABLE();
|
||||
|
||||
/* DMA interrupt init */
|
||||
/* DMA1_Channel2_IRQn interrupt configuration */
|
||||
@ -55,6 +56,12 @@ void MX_DMA_Init(void)
|
||||
/* DMA1_Channel5_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Channel5_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Channel5_IRQn);
|
||||
/* DMA2_Channel3_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA2_Channel3_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA2_Channel3_IRQn);
|
||||
/* DMA2_Channel4_5_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA2_Channel4_5_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA2_Channel4_5_IRQn);
|
||||
|
||||
}
|
||||
|
||||
|
||||
@ -54,7 +54,7 @@ void MX_GPIO_Init(void)
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(DIR2_GPIO_Port, DIR2_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(GPIOA, DIR4_Pin|DIR2_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOB, DIR1_Pin|HOST_485EN_Pin, GPIO_PIN_RESET);
|
||||
@ -79,29 +79,27 @@ void MX_GPIO_Init(void)
|
||||
/*Configure GPIO pins : PC13 PC14 PC15 PC0
|
||||
PC1 PC2 PC3 PC4
|
||||
PC5 PC6 PC7 PC8
|
||||
PC9 PC10 PC11 PC12 */
|
||||
PC9 PC12 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0
|
||||
|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_4
|
||||
|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_8
|
||||
|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
|
||||
|GPIO_PIN_9|GPIO_PIN_12;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PA0 PA4 PA5 PA6
|
||||
PA7 PA8 PA11 PA12
|
||||
PA15 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6
|
||||
|GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_11|GPIO_PIN_12
|
||||
|GPIO_PIN_15;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : DIR2_Pin */
|
||||
GPIO_InitStruct.Pin = DIR2_Pin;
|
||||
/*Configure GPIO pins : DIR4_Pin DIR2_Pin */
|
||||
GPIO_InitStruct.Pin = DIR4_Pin|DIR2_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(DIR2_GPIO_Port, &GPIO_InitStruct);
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PA4 PA5 PA6 PA7
|
||||
PA8 PA11 PA12 PA15 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7
|
||||
|GPIO_PIN_8|GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_15;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PB0 PB1 PB3 PB4
|
||||
PB5 PB6 PB7 PB8
|
||||
|
||||
@ -182,7 +182,7 @@ static void handle_status_request(uint8_t sn)
|
||||
"\"errorCode\":%d,"
|
||||
"\"initStatus\":%d"
|
||||
"}",
|
||||
deviceStatus.deviceStatus,
|
||||
deviceStatus.sensorStatus,
|
||||
deviceStatus.valves.angle1,
|
||||
deviceStatus.valves.angle2,
|
||||
deviceStatus.pumps.status1,
|
||||
|
||||
@ -60,6 +60,10 @@ uint8_t motorRxBuf[MOTOR_BUFFER_SIZE]; //接收缓存
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
// HOST_485EN-uart3,原HOST，无法通信，暂时放弃
|
||||
// dir2-uart2,控制泵
|
||||
// dir4-uart4,控制阀
|
||||
// dir1-uart1,HOST
|
||||
void transDataToHost(uint8_t *data, uint16_t len)
|
||||
{
|
||||
// 开启uart3 dma
|
||||
@ -80,6 +84,12 @@ void transDataToMotorValve(uint8_t *data, uint16_t len)
|
||||
HAL_GPIO_WritePin(DIR2_GPIO_Port, DIR2_Pin, GPIO_PIN_RESET);
|
||||
// HAL_Delay(100);
|
||||
}
|
||||
void transDataToMotorValve2(uint8_t *data, uint16_t len)
|
||||
{
|
||||
HAL_GPIO_WritePin(DIR4_GPIO_Port, DIR4_Pin, GPIO_PIN_SET);
|
||||
HAL_UART_Transmit(&huart4, data, len, 100);
|
||||
HAL_GPIO_WritePin(DIR4_GPIO_Port, DIR4_Pin, GPIO_PIN_RESET);
|
||||
}
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
@ -121,8 +131,7 @@ int main(void)
|
||||
MX_USART2_UART_Init();
|
||||
MX_SPI2_Init();
|
||||
MX_USART3_UART_Init();
|
||||
|
||||
|
||||
MX_UART4_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
memset(hostRxBuf, 0xff, HOST_BUFFER_SIZE);
|
||||
// 开启uart1中断和dma，使用uart1为host
|
||||
@ -143,7 +152,9 @@ int main(void)
|
||||
// http_test_request();
|
||||
HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_RESET);
|
||||
printf("Init success!\r\n");
|
||||
runPumpDemo();
|
||||
initSystem();
|
||||
// runPumpDemo();
|
||||
runValveDemo();
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
@ -161,6 +172,14 @@ int main(void)
|
||||
hostRxEnd = 0;
|
||||
HAL_UART_Receive_DMA(&huart1, hostRxBuf, HOST_BUFFER_SIZE);
|
||||
}
|
||||
|
||||
static uint32_t count = 0;
|
||||
if(count++ > 5000*2) {
|
||||
count = 0;
|
||||
updateSystemStatus();
|
||||
// runPumpDemo();
|
||||
// runValveDemo();
|
||||
}
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
@ -55,10 +55,13 @@
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
extern DMA_HandleTypeDef hdma_uart4_rx;
|
||||
extern DMA_HandleTypeDef hdma_uart4_tx;
|
||||
extern DMA_HandleTypeDef hdma_usart1_rx;
|
||||
extern DMA_HandleTypeDef hdma_usart1_tx;
|
||||
extern DMA_HandleTypeDef hdma_usart3_rx;
|
||||
extern DMA_HandleTypeDef hdma_usart3_tx;
|
||||
extern UART_HandleTypeDef huart4;
|
||||
extern UART_HandleTypeDef huart1;
|
||||
extern UART_HandleTypeDef huart2;
|
||||
extern UART_HandleTypeDef huart3;
|
||||
@ -326,6 +329,48 @@ void USART3_IRQHandler(void)
|
||||
/* USER CODE END USART3_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles UART4 global interrupt.
|
||||
*/
|
||||
void UART4_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UART4_IRQn 0 */
|
||||
|
||||
/* USER CODE END UART4_IRQn 0 */
|
||||
HAL_UART_IRQHandler(&huart4);
|
||||
/* USER CODE BEGIN UART4_IRQn 1 */
|
||||
|
||||
/* USER CODE END UART4_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA2 channel3 global interrupt.
|
||||
*/
|
||||
void DMA2_Channel3_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA2_Channel3_IRQn 0 */
|
||||
|
||||
/* USER CODE END DMA2_Channel3_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_uart4_rx);
|
||||
/* USER CODE BEGIN DMA2_Channel3_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA2_Channel3_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA2 channel4 and channel5 global interrupts.
|
||||
*/
|
||||
void DMA2_Channel4_5_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA2_Channel4_5_IRQn 0 */
|
||||
|
||||
/* USER CODE END DMA2_Channel4_5_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_uart4_tx);
|
||||
/* USER CODE BEGIN DMA2_Channel4_5_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA2_Channel4_5_IRQn 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
122
Core/Src/usart.c
122
Core/Src/usart.c
@ -24,14 +24,45 @@
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
UART_HandleTypeDef huart4;
|
||||
UART_HandleTypeDef huart1;
|
||||
UART_HandleTypeDef huart2;
|
||||
UART_HandleTypeDef huart3;
|
||||
DMA_HandleTypeDef hdma_uart4_rx;
|
||||
DMA_HandleTypeDef hdma_uart4_tx;
|
||||
DMA_HandleTypeDef hdma_usart1_rx;
|
||||
DMA_HandleTypeDef hdma_usart1_tx;
|
||||
DMA_HandleTypeDef hdma_usart3_rx;
|
||||
DMA_HandleTypeDef hdma_usart3_tx;
|
||||
|
||||
/* UART4 init function */
|
||||
void MX_UART4_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN UART4_Init 0 */
|
||||
|
||||
/* USER CODE END UART4_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN UART4_Init 1 */
|
||||
|
||||
/* USER CODE END UART4_Init 1 */
|
||||
huart4.Instance = UART4;
|
||||
huart4.Init.BaudRate = 115200;
|
||||
huart4.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart4.Init.StopBits = UART_STOPBITS_1;
|
||||
huart4.Init.Parity = UART_PARITY_NONE;
|
||||
huart4.Init.Mode = UART_MODE_TX_RX;
|
||||
huart4.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart4.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart4) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN UART4_Init 2 */
|
||||
|
||||
/* USER CODE END UART4_Init 2 */
|
||||
|
||||
}
|
||||
/* USART1 init function */
|
||||
|
||||
void MX_USART1_UART_Init(void)
|
||||
@ -124,7 +155,70 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(uartHandle->Instance==USART1)
|
||||
if(uartHandle->Instance==UART4)
|
||||
{
|
||||
/* USER CODE BEGIN UART4_MspInit 0 */
|
||||
|
||||
/* USER CODE END UART4_MspInit 0 */
|
||||
/* UART4 clock enable */
|
||||
__HAL_RCC_UART4_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
/**UART4 GPIO Configuration
|
||||
PC10 ------> UART4_TX
|
||||
PC11 ------> UART4_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* UART4 DMA Init */
|
||||
/* UART4_RX Init */
|
||||
hdma_uart4_rx.Instance = DMA2_Channel3;
|
||||
hdma_uart4_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_uart4_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_uart4_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_uart4_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_uart4_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_uart4_rx.Init.Mode = DMA_NORMAL;
|
||||
hdma_uart4_rx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
if (HAL_DMA_Init(&hdma_uart4_rx) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmarx,hdma_uart4_rx);
|
||||
|
||||
/* UART4_TX Init */
|
||||
hdma_uart4_tx.Instance = DMA2_Channel5;
|
||||
hdma_uart4_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||
hdma_uart4_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_uart4_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_uart4_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_uart4_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_uart4_tx.Init.Mode = DMA_NORMAL;
|
||||
hdma_uart4_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
if (HAL_DMA_Init(&hdma_uart4_tx) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmatx,hdma_uart4_tx);
|
||||
|
||||
/* UART4 interrupt Init */
|
||||
HAL_NVIC_SetPriority(UART4_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(UART4_IRQn);
|
||||
/* USER CODE BEGIN UART4_MspInit 1 */
|
||||
|
||||
/* USER CODE END UART4_MspInit 1 */
|
||||
}
|
||||
else if(uartHandle->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspInit 0 */
|
||||
|
||||
@ -285,7 +379,31 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
if(uartHandle->Instance==USART1)
|
||||
if(uartHandle->Instance==UART4)
|
||||
{
|
||||
/* USER CODE BEGIN UART4_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END UART4_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_UART4_CLK_DISABLE();
|
||||
|
||||
/**UART4 GPIO Configuration
|
||||
PC10 ------> UART4_TX
|
||||
PC11 ------> UART4_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11);
|
||||
|
||||
/* UART4 DMA DeInit */
|
||||
HAL_DMA_DeInit(uartHandle->hdmarx);
|
||||
HAL_DMA_DeInit(uartHandle->hdmatx);
|
||||
|
||||
/* UART4 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(UART4_IRQn);
|
||||
/* USER CODE BEGIN UART4_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END UART4_MspDeInit 1 */
|
||||
}
|
||||
else if(uartHandle->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
||||
|
||||
|
||||
@ -1 +1 @@
|
||||
Subproject commit ce8530303e7042bb58c67772ecd9c32586df1fdb
|
||||
Subproject commit 614cb70134cfc25450f62f3036b7bf9a190f7859
|
||||
89
f1CTL.ioc
89
f1CTL.ioc
@ -6,7 +6,27 @@ Dma.Request0=USART1_RX
|
||||
Dma.Request1=USART1_TX
|
||||
Dma.Request2=USART3_RX
|
||||
Dma.Request3=USART3_TX
|
||||
Dma.RequestsNb=4
|
||||
Dma.Request4=UART4_RX
|
||||
Dma.Request5=UART4_TX
|
||||
Dma.RequestsNb=6
|
||||
Dma.UART4_RX.4.Direction=DMA_PERIPH_TO_MEMORY
|
||||
Dma.UART4_RX.4.Instance=DMA2_Channel3
|
||||
Dma.UART4_RX.4.MemDataAlignment=DMA_MDATAALIGN_BYTE
|
||||
Dma.UART4_RX.4.MemInc=DMA_MINC_ENABLE
|
||||
Dma.UART4_RX.4.Mode=DMA_NORMAL
|
||||
Dma.UART4_RX.4.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
|
||||
Dma.UART4_RX.4.PeriphInc=DMA_PINC_DISABLE
|
||||
Dma.UART4_RX.4.Priority=DMA_PRIORITY_LOW
|
||||
Dma.UART4_RX.4.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
|
||||
Dma.UART4_TX.5.Direction=DMA_MEMORY_TO_PERIPH
|
||||
Dma.UART4_TX.5.Instance=DMA2_Channel5
|
||||
Dma.UART4_TX.5.MemDataAlignment=DMA_MDATAALIGN_BYTE
|
||||
Dma.UART4_TX.5.MemInc=DMA_MINC_ENABLE
|
||||
Dma.UART4_TX.5.Mode=DMA_NORMAL
|
||||
Dma.UART4_TX.5.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
|
||||
Dma.UART4_TX.5.PeriphInc=DMA_PINC_DISABLE
|
||||
Dma.UART4_TX.5.Priority=DMA_PRIORITY_LOW
|
||||
Dma.UART4_TX.5.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
|
||||
Dma.USART1_RX.0.Direction=DMA_PERIPH_TO_MEMORY
|
||||
Dma.USART1_RX.0.Instance=DMA1_Channel5
|
||||
Dma.USART1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
|
||||
@ -53,34 +73,38 @@ Mcu.IP1=NVIC
|
||||
Mcu.IP2=RCC
|
||||
Mcu.IP3=SPI2
|
||||
Mcu.IP4=SYS
|
||||
Mcu.IP5=USART1
|
||||
Mcu.IP6=USART2
|
||||
Mcu.IP7=USART3
|
||||
Mcu.IPNb=8
|
||||
Mcu.IP5=UART4
|
||||
Mcu.IP6=USART1
|
||||
Mcu.IP7=USART2
|
||||
Mcu.IP8=USART3
|
||||
Mcu.IPNb=9
|
||||
Mcu.Name=STM32F103V(C-D-E)Tx
|
||||
Mcu.Package=LQFP100
|
||||
Mcu.Pin0=OSC_IN
|
||||
Mcu.Pin1=OSC_OUT
|
||||
Mcu.Pin10=PB13
|
||||
Mcu.Pin11=PB14
|
||||
Mcu.Pin12=PB15
|
||||
Mcu.Pin13=PD8
|
||||
Mcu.Pin14=PD9
|
||||
Mcu.Pin15=PD10
|
||||
Mcu.Pin16=PA9
|
||||
Mcu.Pin17=PA10
|
||||
Mcu.Pin18=PA13
|
||||
Mcu.Pin19=PA14
|
||||
Mcu.Pin2=PA1
|
||||
Mcu.Pin20=VP_SYS_VS_Systick
|
||||
Mcu.Pin3=PA2
|
||||
Mcu.Pin4=PA3
|
||||
Mcu.Pin5=PB2
|
||||
Mcu.Pin6=PE15
|
||||
Mcu.Pin7=PB10
|
||||
Mcu.Pin8=PB11
|
||||
Mcu.Pin9=PB12
|
||||
Mcu.PinsNb=21
|
||||
Mcu.Pin10=PB12
|
||||
Mcu.Pin11=PB13
|
||||
Mcu.Pin12=PB14
|
||||
Mcu.Pin13=PB15
|
||||
Mcu.Pin14=PD8
|
||||
Mcu.Pin15=PD9
|
||||
Mcu.Pin16=PD10
|
||||
Mcu.Pin17=PA9
|
||||
Mcu.Pin18=PA10
|
||||
Mcu.Pin19=PA13
|
||||
Mcu.Pin2=PA0-WKUP
|
||||
Mcu.Pin20=PA14
|
||||
Mcu.Pin21=PC10
|
||||
Mcu.Pin22=PC11
|
||||
Mcu.Pin23=VP_SYS_VS_Systick
|
||||
Mcu.Pin3=PA1
|
||||
Mcu.Pin4=PA2
|
||||
Mcu.Pin5=PA3
|
||||
Mcu.Pin6=PB2
|
||||
Mcu.Pin7=PE15
|
||||
Mcu.Pin8=PB10
|
||||
Mcu.Pin9=PB11
|
||||
Mcu.PinsNb=24
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32F103VCTx
|
||||
@ -91,6 +115,8 @@ NVIC.DMA1_Channel2_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
|
||||
NVIC.DMA1_Channel3_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
|
||||
NVIC.DMA1_Channel4_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
|
||||
NVIC.DMA1_Channel5_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
|
||||
NVIC.DMA2_Channel3_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
|
||||
NVIC.DMA2_Channel4_5_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
|
||||
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.ForceEnableDMAVector=true
|
||||
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
@ -100,6 +126,7 @@ NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
||||
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
|
||||
NVIC.UART4_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
|
||||
NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
|
||||
NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
|
||||
NVIC.USART3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
|
||||
@ -108,6 +135,10 @@ OSC_IN.Mode=HSE-External-Oscillator
|
||||
OSC_IN.Signal=RCC_OSC_IN
|
||||
OSC_OUT.Mode=HSE-External-Oscillator
|
||||
OSC_OUT.Signal=RCC_OSC_OUT
|
||||
PA0-WKUP.GPIOParameters=GPIO_Label
|
||||
PA0-WKUP.GPIO_Label=DIR4
|
||||
PA0-WKUP.Locked=true
|
||||
PA0-WKUP.Signal=GPIO_Output
|
||||
PA1.GPIOParameters=GPIO_Label
|
||||
PA1.GPIO_Label=DIR2
|
||||
PA1.Locked=true
|
||||
@ -142,6 +173,10 @@ PB2.GPIOParameters=GPIO_Label
|
||||
PB2.GPIO_Label=DIR1
|
||||
PB2.Locked=true
|
||||
PB2.Signal=GPIO_Output
|
||||
PC10.Mode=Asynchronous
|
||||
PC10.Signal=UART4_TX
|
||||
PC11.Mode=Asynchronous
|
||||
PC11.Signal=UART4_RX
|
||||
PD10.GPIOParameters=PinState,GPIO_Label
|
||||
PD10.GPIO_Label=NET_CS
|
||||
PD10.Locked=true
|
||||
@ -191,7 +226,7 @@ ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UAScriptAfterPath=
|
||||
ProjectManager.UAScriptBeforePath=
|
||||
ProjectManager.UnderRoot=true
|
||||
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_USART2_UART_Init-USART2-false-HAL-true,6-MX_SPI2_Init-SPI2-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true
|
||||
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_USART2_UART_Init-USART2-false-HAL-true,6-MX_SPI2_Init-SPI2-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,8-MX_UART4_Init-UART4-false-HAL-true
|
||||
RCC.ADCFreqValue=36000000
|
||||
RCC.AHBFreq_Value=72000000
|
||||
RCC.APB1CLKDivider=RCC_HCLK_DIV2
|
||||
@ -223,6 +258,8 @@ SPI2.Direction=SPI_DIRECTION_2LINES
|
||||
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||
SPI2.Mode=SPI_MODE_MASTER
|
||||
SPI2.VirtualType=VM_MASTER
|
||||
UART4.IPParameters=VirtualMode
|
||||
UART4.VirtualMode=Asynchronous
|
||||
USART1.IPParameters=VirtualMode
|
||||
USART1.VirtualMode=VM_ASYNC
|
||||
USART2.IPParameters=VirtualMode
|
||||
|
||||
Loading…
Reference in New Issue
Block a user